10,000 Btu Arctic King Window Air Conditioner With Remote, White

Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains. In a thunderstorm, the unit should be turned off to avoid damage to the machine due to lightning. Do not attempt to roll the unit across thick carpet or to roll over objects, as this could cause the unit to tip over. The unit must be kept free from obstruction to ensure proper functioning and to mitigate safety hazards.

Arctic King

Used to expel water to elevated drainage location. Claimed pints/day are per manufacturers, at 65º F and 60 percent relative humidity. Energy efficiencyEnergy efficiency measures kWh needed to remove a pint of water from the air; the fewer the kilowatts, the higher the score.

You can rely on freezers because they outlast all others in terms of durability. You’ll probably find yourself facing a dilemma when it comes to size. If you’re limited on space, you’ll have to go with a smaller freezer, but that means giving up capacity. Squeezing a large roast or turkey into a freezer that size may become a challenge, especially if you already have items inside. Shelves and baskets only complicate this, so make sure if you buy one that comes with those features, they’re removable.

Direct the hose toward the drain, making sure that there are no kinks that will impede water flow. Place the end of the hose into the drain and make sure the end of the hose is directed downward to let the water flow smoothly. When the continuous drain hose is not used, ensure that the corresponding whirlpool mini refrigerator drain plug and knob are installed firmly to prevent leakage. After the unit has stopped, it cannot be restarted until 3 minutes time has elapsed. Operation will automatically resume after 3 minutes. While in this mode, you cannot select a fan speed or adjust the temperature.

This is mainly attributed to setting temperature too low. For the most part, this is brought about by improper installation and you can remedy it by tilting the AC slightly to allow water to drain the right way. Air directional louvers are positioned improperly- this inhibits air distribution leading to insufficient cooling. Temperature has been set too high– another probable reason. Incorrect temperature settings– If you have set it to a higher temp setting, change to a lower value and see if it helps. The temperature sensing element is touching the cold coil – This also hinders cooling and you need to straighten the tube away from the coil.